Specifications:

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

一，Relay Receiver Board Parameter

Operating voltage: AC85V-265V

Static working current: ≤7mA

Max current  :  10A

Max load:   2200W

RF frequency: 433MHZ 

Pin  :  NO / COM / NC

Receiving sensitivity: ≤ -105dbm

Modulation mode: ASK (amplitude modulation)

Operating temperature: -20~+70 ℃

Circuit board size: 65.5*36*16mm

Shell size: 70*41*22mm

Amount of storage remote controls  :  35 pieces

Support encoding  :  1527 Leaning code /2262 fixed code

RF Operating mode  :  ASK superheterodyne wireless reception

Receiving range  :  Open space is more than 50 meters

Remote operating mode   : Momentary Mode / Toggle Mode / Latched Mode

二，working/output way

1.Momentary/Joggle: Press and hold->On;Release->Off

Keep pressing one button, the corresponding channel is working /on;Release your finger is stop/OFF.(4 channel switch(receiver) need 4 button remote control (transmitter )

2.Toggle/Self-Lock: Press->On;Press again->Off

Press one button for one time, the corresponding channel is working/on;Press the same button again to stop/OFF.(4 channel switch(receiver) need 4 button remote control (transmitter).

3.Latched/Inter-Lock: Press->on;Press other button->Off

Press one button for one time, the corresponding channel is working/on;Press another button is stop/OFF(At the same time, another corresponding channel works).(4 channel switch( receiver) need 4 buttons remote control (transmitter).

三，The Setting of Working Mode:

1.Momentary Mode: Pressing the learning key button on the receiver board once (LED Indicator on receiver board will signaling simultaneously), then press any of the remote button, signaling three times by remote's LED indicator means setting Momentary Mode successfully.

2.Toggle Mode: Pressing two times the learning key button on the receiver board twice(LED Indicator on receiver board will signaling simultaneously),then press any of the remote button , signaling three times by remote's LED means setting Toggle Mode successfully.

3.Latched Mode: Pressing the learning key button on the receiver board three times (LED Indicator on receiver board will signaling simultaneously), then press first remote button, follow on second remote button, signaling three times by remote's LED indicator means setting Latching Mode successfully (first button stands for on, second button stands for off ).

4.2CH Momentary + 2CH Toggle: Pressing the learning key button on the receiver board four times(LED Indicator on receiver board will signaling simultaneously),then press any of the remote button , signaling three times by remote's LED indicator means setting successfully.

四， Clearance method:

pacote inclued:

A:

1x Transmitter(with battery)

B:

C:

1x Transmitter(with battery)

D:

E:

F:

4x Transmitter(with battery)