Description

Working Voltage: DC5V-24V 

(DC 5V 6V 7.4V 9V 12V 14V 16V 18V 24V ) All is ok

Quiescent /Standby Current: 3.6-10ma

Working Current: 70-130ma ( if your power supply is mini battery , you must care how long can it work for you)

Relay Standard :  10A

Max Load:10A Relay, Resistive load≤8A,Inductive load≤3A

Board Size : 31.3*34.8*17mm  Case Size: 40*37*25mm

Working Frequency: 433.92MHZ

Learning Code: Learning Button to add Transmitter

Working Mode: Momentary Toggle Latched adjusted by Learning Button

Momentary----- Press and Hold---ON, Release----OFF

Toggle-------Press one time ----ON. Press it again ----OFF

Latched--------Press A ----ON, Press B-----OFF    (Latched Mode will ship with 2 Button Transmitter)

Momentary 5s Time Delay OFF----- Press and Hold---ON, Release----5s laterOFF

Momentary 10s Time Delay OFF----- Press and Hold---ON, Release----10s laterOFF

Momentary 15s Time Delay OFF----- Press and Hold---ON, Release----15s laterOFF

Momentary 20s Time Delay OFF----- Press and Hold---ON, Release----20s laterOFF

Power ON Receiver ON -----Input power -----ON, Press Remote -----OFF

V-     -------------------Input GND –

V+   -------------------Input VCC +

NC---------------------Normally Close

COM------------------Common

NO---------------------Normally Open

Momentary Toggle Latched adjusted by learning Button 

Clearing Code

Press the Receiver learning button for 9 times, LED indicator off and flash 5 times , it means the code have been cleared

(with the same remote ,if you need change working mode, you must clear the code first ,then relearn it again)

Learning Code

Momentary------Press the learning button for 1 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Toggle------Press the learning button for 2 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Latched-------Press the learning button for 3 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 5s time delay off-----Press the learning button for 4 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 10s time delay off-----Press the learning button for 5 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 15s time delay off-----Press the learning button for 6 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 20s time delay off-----Press the learning button for 7 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Power ON Receiver ON-------Press the learning button for 8 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times