PETG Filament Features:

1. Environmental protection and non-toxic;2. Bright color;3. Low shrinkage;4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellentThe toughness, weather resistance, and good adhesion.5. Good dimensional stability, no cracksAnd warping.6. High transparency and good gloss.Suitable for all types of FDM3D printers, suitableCo-print all kinds of commonly used models, crafts, industryPieces, advertising words, etc.

PETG Product Parameter:

Wire diameter: 1.75/3.0MMTolerance: ±0.02MMPrinting temperature: 220-250℃Bottom plate temperature: need to apply glue when not heatingHeating 60-80℃, no glueRally (KGF): 8-14Melt index: 6-11g/10min(220℃, 2.16kg)Elongation at break: 210%Printing speed: 50-100MM/sAir bubbles: 100% zero bubblesNet weight: 1KG/rollGross weight: 1.3KG/rollLength: 1.75MM(1KG)=320M,3.0MM(1KG)=105M

ABS Filament Features:

1. Has excellent impact strength and wear resistance;2. Chemical resistance, dyeing properties, molding processingAnd mechanical processing effect is better;3. The support is easy to peel off;Suitable for equipment with heating device on the bottom plate, printableStrong requirements for printing strength and the need for follow-upProcessed models, such as: dyeing, polishing, electroplatingEtc., suitable for making small parts.4.The white of ABS has a little yellow.

ABS Product Parameter:

Wire diameter: 1.75/3.0MMTolerance: ±0.02MMPrinting temperature: 230-270℃Bottom plate temperature: 80-120℃Rally (KGF): 6-11Melt index: 12-19g/10min(220℃,10kg)Elongation at break: 25%Printing speed: 50-100MM/sAir bubbles: 100% zero bubblesNet weight: 1 KG/rollGross weight: 1.3 KG/rollLength: 1.75MM(1KG)=395M3.0MM(1KG)=130M

SILK Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;2. Close to silk effect;3. Low shrinkage4. Toughness 50 times higher than PLA on the marketPrinting is smooth, and the surface of the finished product is smoother and more delicate;Suitable for all types of FDM3D printers, suitableCo-print crafts, artwork, industrial design samplesAnd product models with higher toughness requirements, etc.

SILK Product Parameter:

Wire diameter: 1.75MMTolerance: ±0.02MMPrinting temperature: 200-230℃Bottom plate temperature: need to apply glue when not heatingHeating 60-80℃, no gluePull force (KGF): 6-8Melt index: 5-10g/10min(190℃, 2.16kg)Elongation at break: 200%Printing speed: 30-60MM/sAir bubbles: 100% zero bubblesNet weight: 1KG/rollGross weight: 1.3KG/rollLength: 1.75MM(1KG)=330M

Shipment

*We will ship within 48 hours(Working days).*We have oversea warehouse: Australia, Germany, Spain, US, UK, France, Czech Republic.

Feedback

* Your feedback is very important for our store and customer.* If you have any problem with the product, please feel to contact us, we will try to solve problem till you are satisfied.