2 Wire CCT LED Controller 12V 24V 5A 1CH 2.4G Wireless RF Dual White CCT Controler Touch Remote for WW CW LED Strip Light V2-S

Model: MJJCLED-V2-SRF remote control

Features:

● Only apply to 2-wires WW+CW LED strip.● Match with RF 2.4G single zone or multiple zone dual color remote control. ● One RF controller accept up to 10 remote control.● 4096 levels 0-100% dimming smoothly without any flash.● Auto-transmitting function: Controller automaticly transmit signal to another controller with 30m control distance.● Synchronize on multiple number of controllers.● 3 levels color temperature (WW, NW and CW) selectable by continuous power off and on operation.● Connect with external push switch to achieve on/off and 0-100% dimming function.

Technical Parameters(V5-S):

● Input voltage: 12-24VDC● Output type: PWM constant voltage● Output current: 5A● Output power: 60-120W● Grey levels: 4096/CH● Dimming range: 0-100%● Remote distance: 30m● Working temperature: -30℃~55℃● Net weight: 53g

Package Including:

Kindly see the SKU photos,we write the details on the photos.Such as: You choose V2-S Only, that means you order 1pc V2-S only,without the remote.You choose the push switch Only, that means you order 1pc push switch only,without the V2-5 and the remote.Again,because of the safety checking for the customs,the remote are not with the batteries.

Note:

It can be only apply to 2-wires WW+CW LED stripBefore using, kindly make sure match/set according to your led strip light model. so that the led stip can work properly.

CCT Remote (Optional):

●R7 : 4 Zone CCT Remote●R7-1: 1 Zone CCT RemoteStandard: EU standard)

If you need to buy a push switch, buy from this link together.

V2-S work as RF converter to match RF LED controller or dimming driver.

End user can choose the suitable match/delete ways. Two options are offered for selection:●Use the controller’s Match keyMatch: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.The LED indicator fast flash a few times means match is successful.Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.●Use Power RestartMatch: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful..Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.