Description

3S 12V Digital LED Capacity Tester Battery Indicator 24V 48V Lipo li-ion Remaining Power Tester With Cable Blue/Green Display

Features: 1. Using high-quality materials, the quality is guaranteed 2. The power indicator has reverse connection protection, and it will not burn out when reversed. 3. The back button can adjust the mode 4. Battery symbol + percentage display, intuitive and clear 5. Directly connect the positive and negative electrodes of the battery for measurement. If there is a protection board, please connect it to the front of the battery protection board 6. The product design principle is to calculate the remaining power by measuring the battery voltage, which is inaccurate during the charging and discharging process, and accurate in the static state. parameter: Lithium battery: 3 strings to 15 strings Lead acid: 12V / 24V 36V / 48V Input voltage: 8-63V, self-adjustable Size: 46*25mm Thickness: 10mm Input current: 5-12mA Display window size: 36*12mm Suitable battery type: lead-acid/lead-acid battery and lithium battery Specification adjustment method: In the power-off state, press and hold the back button to power on the display, and the current battery specification will be displayed. Then click the back button to adjust the battery specification. After selecting the required specification, power off and then power on. Instructions for use: (1) Key operation: A white button on the back of the indicator is used to select parameters. (2) Battery model selection: 1. Turn off the indicator light 2. The key 3. Turn on the indicator light 4. Release the button, the screen will display English characters: "XP" or "XC", x is the number of cells, then the user can select the battery model by the keys in the following order: P1: Pb12V lead-acid battery P2: Pb24V lead-acid battery P3: Pb36V lead-acid battery P4: Pb48V lead-acid battery C2: 2 lithium batteries C3: 3 lithium batteries C4: 4 lithium batteries C5: 5 lithium batteries C6: 6 lithium batteries C7: 7 lithium batteries ...... C15: 15 lithium batteries installation method: Cut a rectangular hole and two fixing screw holes on the panel of the device to be installed, place the monitor inside the panel of the device to be installed, and install it from the inside of the panel to the front, exposing only the display area of the monitor, and then install it from the panel of the device. Fix it with self-tapping screws on the front Package list: Capacity tester*1 Screw bag*1 Wire*1