AC 110V-220V C/F Digital Thermostat Temperature Alarm Controller Sensor W1308
Features:
- This product is an upgraded version of the W1308.
- Added conversion function in Celsius and Fahrenheit
- Fully sealed, waterproof and safer
Application:
- Fridge freezer ,display cabinets temperature control, plastic greenhouse, Incubator,Medical equipment, pet house, planting and breeding industry, electrical control cabinet cooling, ventilation containers, reptiles insulation, EPS incubator, sauna, PC cases, civil and industrial equipment
- Easy and convenient to use
Specifications:
- Temperature control range: -50 ~ 120 ° C
- Measurement Accuracy: 0.1 ° C
- Control accuracy: 0.1 ° C
- Hysteresis accuracy: 0.1 ° C
- Refresh rate: 0.5 S
- Input Power: AC 110V~220V
- Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
- Output: 1 Channel relay output, capacity = 10A
- Environmental requirements: -10 ~ 60 ° Humidity 20% -85%
- Size: 10*4.8*2.5cm
- Work light: Red
Package include:
1 x Temperature Control Switch
------------------------------------------
USER GUIDE
Celsius and Fahrenheit switching
Press and hold the C/F button for three seconds, the C mode is changed to the F mode, the corresponding indicator light is on, and then the C/F button is pressed for three seconds. The F mode is changed to the C mode, the corresponding indicator light is on, and the power off function is saved. .
Quick Setup
1.Determine the mode
Press and hold SET for about 5 seconds to display P0, press SET again to display the mode.
Press +- switch mode, H is heating mode, C is cooling mode
2. Set the return difference:
The hysteresis is also how much the fall back after the set temperature stops. The default is 2
If you need to modify, please press and hold SET and let go for about 5 seconds to display P0, press +- to switch P1, press ST again to display the difference, press +- to set the difference back.
3. Set the temperature:
After setting the mode and hysteresis, press ENT to confirm the return. At this time, the screen displays the real-time temperature. Press SET screen once and press +- to set the desired temperature.
Code table
P0: working mode (range: H/C) (default: C)
P1: Hysteresis setting (range: 0.1-30) (default: 2.0)
P2: Setting limit is high (range: +120) (default: 120)
P3: Low setting limit (range: -55) (default: -55)
P4: Temperature correction (range: +10~-10) (default: 0)
P5: Delayed start (range 0-10 minutes) (default: 0)
P6: High temperature alarm (-55~120) (default: off)
P7: Data lock (on~off) (default: off)
P8: Restore factory settings (on~off) (default: off)
In the off state, press and hold the up and down keys to quickly restore the factory settings.
