QFP64 LQFP64 STM32F10xR STM32L1xxR STM32F2xxR STM32F4xxR Yamaichi IC Test Socket Adapter 0.5mm Pitch = STM32-QFP64

Overview

Yamaichi IC Test & Burnin Socket with a simple board, especially for STM32 microcontroller in QFP64(0.5mm pitch) package.

Features

1. 20-pin JTAG/SWD port and/or 4-pin USART1 interface for programming/testing

2. External crystal can be connected via on board socket for system clock

3. Onboard 32.768K crystal oscillator

4. Two LED indicators for testing, which are connected to the I/O pins via jumpers

5. All the MCU pins are accessible on expansion connectors

* pin header pitch: 2.54mm(100mil)

Supported Devices

STM32 microcontroller in QFP64(0.5mm pitch) package with compatible pinouts:

STM32L1xxR series (STM32L151R8, STM32L152RB, etc.)

STM32F0xxR series (STM32F051RC, STM32F051RB, etc.)

STM32F1xxR series (STM32F103RC, STM32F100RB, etc.)

STM32F2xxR series (STM32F207RC, STM32F215RB, etc.)

STM32F3xxR series (STM32F303R8, STM32F373RB, etc.)

STM32F4xxR series (STM32F407RC, STM32F415RB, etc.)

Config the onboard "Device selection jumpers" according to the device to be programmed.

What's on Board

JTAG/SWD port

for programming/debugging/testing

compatible with ST-LINK / J-LINK / ULINK2 / STX-RLINK

USART1 port

supports ISP and/or serial port debugging

LED indicators

for quick testing

Pin headers connected to MCU pins

clearly labeled with onboard marks

easy for testing and further expansion

Boot mode configuration

configuring the BOOT0 and BOOT1 via jumpers

3.3V onboard regulator

AMS1117-3.3

5V power input

DC jack or 2-pin header

External crystal socket

insert crystal to the holes on two sides, leave alone the middle hole

Power indicator

Device selection jumpers

short the upper headers for STM32F1xx / STM32L1xx / STM32F05x / STM32F3xx

short the lower headers for STM32F2xx / STM32F4xx

LED jumpers

short the jumpers to connect LEDs to MCU I/O pins for testing

open the jumpers to disconnect

32.768K crystal (on bottom side)

for internal RTC with calibration

Photos

Outline and Dimensions

JTAG/SWD Connector Layout

The STM32-QFP64 houses JTAG/SWD headers for connecting a programmer. The connector layout is shown in below.

Boot Mode Configuration

Depending on the used pin configuration, the Flash memory, system memory or SRAM is selected as the boot space, as shown in Table 1 below.

Package Contains

STM32-QFP64 × 1

USB power cable × 1

Terms & Conditions

1 Payment:

* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to 'Escrow FAQ' to get more details. http://escrow.aliexpress.com/escrow-faq/payment/what-payment-methods-can-i-use.html

2. Shipping:

* We ship items to Worldwide!

* Please make sure that your shipping address is 100% correct.

* All items will be shipped within 48 working hours on receipt of cleared payment.

* We'll add a tracking number after sending the item so that you can track your parcel.

3. Returns Policy:

* We are happy to return any unused item in its original packaging within 14 days of delivery.

* Buyers are responsible for the round(two-way) shipping cost.

4. Feedback:

* We'll leave POSITIVE FEEDBACK on receipt of cleared payment.

* If you're satisfied with the item and our service, please leave POSITIVE FEEDBACK, it's important to us.

* Once any problems occured, please contact us first. We'll try our best to work things out.

Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It's our pleasure to serve you! We appreciate your business!!